Differences

This shows you the differences between two versions of the page.

--- sk [2021/11/18 22:57] – created mbrohart
+++ sk [2021/11/25 03:10] (current) – mbrohart
@@ Line 1: / Line 1: @@
-====== SK ======
+===== SK =====
+===Scheduled Operation ===
-This routine name stands for scheduled mode operation.  The command is used to input the desired schedule to be used by the instrument for the current day only.\\
+SK allows an operating schedule, manually created or created by the [[se|SE]] command to be run for the current day. At the end of the schedule, the program returns to the main menu and must be restarted the next day. \\
-If __continuous__ scheduled operation is desired, then please refer to the SKC command.
+If __continuous__ scheduled operation is desired, then please refer to the [[skc|SKC]] command.
+See also Section 8 of the Brewer Operators Manual, [[skc|SKC]] and [[se|SE]].