fr
This is an old revision of the document!
FR
Micrometer Reset
FR performs a reset of the wavelength adjust micrometers. The micrometers are moved to reference points, and then moved to the operating points as dictated by offset values contained in the instruments constants file.
The FR command is invoked as part of the RE command, or the operator may manually send the FR command if the positions of the micrometers are suspect. The FR command may be used to determine new micrometer offset values, but these values should only be changed under the supervision of qualified personnel.
FR results are recorded in the average file, MIOAVG.nnn.
fr.1637800293.txt.gz · Last modified: 2021/11/25 00:31 by mbrohart