commands
This is an old revision of the document!
Brewer Commands
The Brewer Spectrometer is ran by a series of two (2) letter and three (3) letter commands. *Note*: All three letter command must entered individually, two letter commands can be used as a string of command.
Typically used commands
| Use | |
|---|---|
| Warmup/Diagnostic | pdb1frhphgsldtrsappd¹ |
| pdfrhphgsldtrsappd² | |
| Post drive plate cleaning | sr |
| Sighting | pdazzesi |
| restarting schedule | pdb1frhgcn¹ |
| pdfrhphgcn² | |
| Sighting (sun) | pdazzesi |
| Sighting (moon) | pdazze |
| sim | |
| Post TDP cleaning | sr |
Notes:
¹ For single brewers spectrometers
² For double brewer spectrometers (MkIII)
commands.1639067305.txt.gz · Last modified: 2021/12/09 16:28 by raveel