commands
This is an old revision of the document!
Brewer Commands
The Brewer Spectrometer is ran by a series of two (2) letter and three (3) letter commands. *Note*: All three letter command must entered individually, two letter commands can be used as a string of command.
Typically used commands
| Use | |
|---|---|
| Warmup/Diagnostic | pdb1frhgsldtrsappd¹ |
| pdfrhphgsldtrsappd² | |
| Post drive plate cleaning | sr |
| Restarting Schedule | pdb1frhgcn¹ |
| pdfrhphgcn² | |
| Sighting (sun) | pdazzesi |
| Sighting (moon) | pdazze |
| sim | |
| Post TDP cleaning | sr |
Notes:
¹ For single brewers spectrometers (Multiboard Electronics)
² For double brewer spectrometers (Single Board Electronics)
test
commands.1738075772.txt.gz · Last modified: 2025/01/28 14:49 by reno